Adhesive for fixing the vapour barrier
Special adhesive for attaching the vapour barrier to the SDK profiles.
- time-saving installationi
- swivel nozzle
- quick and precise application
- long open drying period
- 500 ml
Special adhesive for attaching the vapour barrier to the SDK profiles.
A special one-component contact adhesive based on synthetic rubber that significantly reduces the time required to install the vapour barrier. Find out all the benefits and see the exact application procedure in the video below. The advantage of the adhesive is that after application and venting (min. 1 min), the open drying time is about 1 hour, so after this time the film can be peeled off and re-glued. Another benefit of the product is that the spray has a rotating nozzle which can be used to change the direction of the adhesive spray to horizontal or vertical as required. The application of the adhesive is thus precise and fast. You can work with the product at application temperatures ranging from +5 to 30 °C. The 500 ml spray lasts for approx. 80 running metres. We recommend reading the data sheet and safety data sheet before using the product.
Learn about the application procedure and all the benefits of ROKO vapour barrier adhesive via our video.
Not only professional plasterers, but also other DIYers will appreciate all these benefits and will be happy to speed up their work.
Watch the video to learn more...
It is designed to attach the vapour barrier to the metal SDK profiles and to each other. The adhesive for attaching the vapour barrier can be applied to most substrates (common building materials such as wood, masonry, mineral wool, polystyrene, etc.). Not suitable for bonding PE, PP, PTFE. We recommend a preliminary adhesion test for each surface.
